Product SKUs |
|
SuperWorkstation |
|
|
Processor |
|
CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v3 family or Intel® 5th/4th gen. Core™ i7 series (up to 160W TDP **)
- Single Socket R3 (LGA 2011)
|
Core / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
Note |
† BIOS version 2.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support |
|
System Memory |
|
Memory Capacity |
- 8x 288-pin DDR4 DIMM slots
- Up to 1TB ECC 3DS LRDIMM
- Up to 512GB ECC LRDIMM
- Up to 256GB ECC RDIMM
- Up to 64GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only)
|
Memory Type |
- 2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
|
DIMM Sizes |
- 3DS LRDIMM: 128GB
- LRDIMM: 64GB, 32GB
- RDIMM: 32GB, 16GB, 8GB, 4GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
|
Chipset |
|
SATA |
- SATA3 (6Gbps) via C612 controller
- RAID 0, 1, 5, 10 support
|
Network Controllers |
- Intel® i210-AT Dual Port Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
Audio |
- RealTek ALC1150 High Definition Audio
|
|
Input / Output |
|
SATA |
- 10x SATA3 (6Gbps) ports via PCH
|
LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
|
USB |
- 8x USB 3.0 ports (2 front + 6 rear)
|
Audio |
|
Keyboard/Mouse |
- 1x PS/2 Keyboard/Mouse port
|
Serial Port / Header |
|
TPM |
|
|
Expansion Slots |
|
PCI-Express |
- 4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8)
- 2x PCI-E 2.0 x1 (in x4) slots
PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed
|
|
System BIOS |
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
- RTC (Real Time Clock) Wakeup
|
|
Management |
|
Software |
|
Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
|
|
Chassis |
|
Form Factor |
|
Model |
|
|
Dimensions and Weight |
|
Height |
|
Width |
|
Depth |
|
Weight |
- Gross Weight: 35.5 lbs (16.1kg)
- Net Weight: 29.5 lbs (13.4 kg)
|
Available Colors |
|
|
Front Panel |
|
Buttons |
|
LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
Ports |
- 2x front USB 3.0 Ports
- 2x front HD/AC97 Audio Ports
|
|
Drive Bays |
|
Internal |
- 4x 3.5" fixed drive bays
- Enterprise SATA HDD only recommended
|
Peripheral |
- 2x 5.25" peripheral drive bays
- 1x card reader module
|
|
System Cooling |
|
Fans |
- 1x 12cm front cooling fan
|
|
Power Supply |
|
900W AC multi output power supply |
AC Voltage |
- 100-240 V, 50-60 Hz, 10-6 Amp
|
+5V Standby |
|
+12V1 |
|
+12V2 |
|
+12V3 |
|
+12V4 |
|
+5V |
|
+3.3V |
|
-12V |
|
Certification |
Gold Level |
Note: |
• Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W.
|
|
PC Health Monitoring |
|
Voltage |
- +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT
|
FAN |
- Total of 5 fan headers supporting up to 5 fans
- 5 fan headers with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
|
Operating Environment / Compliance |
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|