Product SKUs |
|
SSG-6028R-E1CR16T |
- SuperServer 6028R-E1CR16T (Black)
|
|
Processor/Cache |
|
CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
System Bus |
|
Note |
† BIOS version 2.0 or above is required |
Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
|
System Memory |
|
Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512 ECC RDIMM
|
Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
|
|
On-Board Devices |
|
Chipset |
|
SAS |
- SAS3 (12Gbps) via LSI 3108 controllers; HW RAID 0,1,5,6,10,50,60
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers |
- Intel® X540 Dual Port 10GbE
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
Input / Output |
|
SAS |
|
LAN |
- 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 2x USB 3.0 ports (rear)
- 2x USB 2.0 ports (rear)
- 1x Type A
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
|
|
Chassis |
|
Form Factor |
|
Model |
|
|
Dimensions |
|
Width |
|
Height |
|
Depth |
|
Weight |
- Gross Weight: 58 lbs (26.3 kg)
- Net Weight: 34 lbs (15.4 kg)
|
Available Colors |
|
|
Front Panel |
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
Expansion Slots |
|
PCI-Express |
- 1x PCI-E 3.0 x16 slot
- 6x PCI-E 3.0 x8 slots
|
|
Drive Bays |
|
Hot-swap |
- 16x 3.5" Hot-swap SAS3 drive bays
|
Optional |
- 2x 2.5" Hot-swap drive bays (rear)
|
|
Backplane |
|
SAS3 expander backplane |
|
System Cooling |
|
Fans |
- 4x 8cm hot-swap redundant PWM cooling fans
|
|
Power Supply with Digital Switching Control |
1000W Redundant Titanium Level (96%) Single Output Power Supplies |
AC Input |
- 100-127 V, 50-60 Hz
- 200-240 V, 50-60 Hz
|
+12V |
- Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 83A (200Vac-240Vac) & Min: 0A
|
12V SB |
|
Certification |
Titanium Level [ Test Report ] |
|
System BIOS |
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|