| Product SKUs |
 |
| SYS-F618R2-RC1+ |
- SuperServer F618R2-RC1+ (Black)
|
| |
| Processor/Cache |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
| System Memory |
|
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| On-Board Devices |
|
| Chipset |
|
| SAS |
- LSI 3108 SAS3 (12Gbps) controller;
HW RAID 0, 1, 5, 6, 10, 50, 60
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® i350-AM2 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
| Input / Output (per node) |
|
| SAS |
|
| NVMe |
- 2 Internal NVMe ports (PCI-E 3.0 x4)
Note: NVMe support requires 2 CPUs installed
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| |
| Management |
|
| Software |
|
| Power Configurations |
- ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
 |
| Chassis |
|
| Form Factor |
|
| Model |
|
| |
| Dimensions and Weight |
|
| Width |
|
| Height |
|
| Depth |
|
| Package |
- 28.3" (W) x 15.0" (H) x 42.4" (D)
|
| Weight |
- Net Weight: 150 lbs (68.04 kg)
- Gross Weight: 200 lbs (90.71 kg)
|
| Available Colors |
|
| |
| Front Panel |
|
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
| |
| Expansion Slots (per node) |
|
| PCI-Express |
|
| |
| Drive Bays (per node) |
|
| Hot-swap |
- 6x 2.5" Hot-swap SAS/SATA or 4x 2.5" Hot-swap SAS/SATA + 2x SAS/SATA/NVMe hybrid
|
| |
| Backplane |
|
| 1x SAS/SATA backplane |
| |
| System Cooling (per node) |
|
| Fans |
- 3x 4cm 14k RPM middle fans
|
| |
| Power Supply (76mm Width) |
| 2000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127 Vac / 12-9.5 A / 50-60 Hz
- 200-220 Vac / 10-9.5 A / 50-60 Hz
- 220-230 Vac / 10-9.8 A / 50-60 Hz
- 230-240 Vac / 10-9.8 A / 50-60 Hz
- 200-240 Vac / 11.8-10 A / 50-60 Hz (UL/cUL only)
|
| +12V |
- Max: 83.3A & Min: 0A (100-127 Vac)
- Max: 150A & Min: 0A (200-220 Vac)
- Max: 165A & Min: 0A (220-230 Vac)
- Max: 166.7A & Min: 0A (230-240 Vac)
- Max: 166.7A & Min: 0A (200-240 Vac)(UL/cUL only)
|
| +5Vsb |
|
| Output Type |
- 27 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
| System BIOS |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| Operating Environment / Compliance |
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
