| Product SKUs |
 |
| MBD-H11SSL-NC |
|
| |
|
| |
| Physical Stats |
|
| Form Factor |
|
| Dimensions |
- 12" x 9.6" (30.5cm x 24.4cm)
|
| |
| Processor/Chipset |
|
| CPU |
- Single AMD EPYC™ 7000-series Processor
- Socket SP3
|
| Chipset |
|
| |
| System Memory |
|
| Memory Capacity |
- 8 DIMM slots
- Supports up to 1TB Registered ECC DDR4 2666MHz SDRAM in 8 DIMMs
- 8-channel memory bus
|
| Memory Type |
- DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
|
| DIMM Sizes |
- 8GB, 16GB, 32GB, 64GB, 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| On-Board Devices |
|
| SATA |
|
| SAS |
- Broadcom 3008 SAS3 (12 Gbps) controller
- RAID 0, 1, 10;
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2500 BMC
|
| Network Controllers |
- 2 1GbE LAN via Intel® I210
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
| VGA |
|
| |
| Input / Output |
|
| SAS |
|
| SATA |
|
| NVMe |
- 2 PCI-E 3.0 NVMe x4 Internal Ports
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports
(2 rear, + 2 via header + 1 Type A)
- 4 USB 2.0 ports (2 rear + 2 via header)
|
| VGA |
|
| Others |
- 1 COM port (rear)
- 2 SATA DOM power connector
- 1 TPM 1.2 header
|
| |
| Expansion Slots |
|
| PCI-Express |
- 3 PCI-E 3.0 x8
- 3 PCI-E 3.0 x16
|
|
| M.2 |
- Interface: PCI-E 3.0 x4
- Form factor: 2260, 2280, 22110
- Support SATA devices
|
|
| |
| System BIOS |
|
| BIOS Type |
- AMI 128Mb SPI Flash EEPROM
|
| BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 5.1
- USB Keyboard Support
- SMBIOS 3.1.1
|
| |
| Management |
|
| Software |
|
| Power Configurations |
- ACPI Power Management
- Power-on mode control for AC power loss recovery
|
| |
| PC Health Monitoring |
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, +3.3V standby
- CPU switching voltage regulator
- Supports system management utility
- VBAT
|
| FAN |
- Up to 7-fan status tachometer monitoring
- Up to 7 4-pin fan headers
- Dual Cooling Zone
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal control for 7x Fan connectors
- I²C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- UID
|
| |
| Operating Environment / Compliance |
|
| Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
Doctor 5